DJI Matrice 5T: Thermal Imaging for Search and Inspection

DJI Matrice 5T combines 1K thermal imaging, night vision, LiDAR and radar sensing, relay modes and open onboard AI in a compact IP55 drone for inspection.

Photo source:

DJI Matrice 5T

DJI Matrice 5T: Thermal Imaging for Search and Inspection

DJI Matrice 5T is a compact drone that integrates LiDAR, mmWave radar and vision sensing with an IP55 rating, built for emergency response, inspection and surveying even in harsh environments. Its 1K thermal imaging and enhanced night vision reveal detail day and night. Up to 59 minutes of flight time and relay modes extend reach, while open onboard AI and Pilot 2 plugin support power smart on-site workflows.

How Thermal Imaging Works on the Matrice 5T

The thermal camera has a native 1280×1024 resolution, which quadruples the pixel count of standard 640×512 sensors. UHR Infrared Image delivers real-time 2560×2048 footage at 30 fps, and heat anomalies remain clearly defined even against complex backgrounds. Thermal and visible feeds fuse on the remote, enabling temperature checks and alerts directly on the visible view, and a dial adjusts the fusion ratio. Split screens display up to 3 simultaneous feeds from the wide, tele, thermal, map and Vision Assist views.

Cameras and Night Vision

The wide-angle camera pairs a large 1/0.98-inch sensor with a fast f/1.8 aperture and AI low-light enhancement, reaching ISO 1,600,000 and delivering full-color imagery in conditions as dark as 0.01 lux. The medium telephoto camera has a 50 MP sensor and 3× optical zoom. During power line or bridge inspections, it can detect pins and cracks from 10 meters away and read instrument data at substations.

The telephoto camera offers monochrome night vision with 11× optical and 176× hybrid zoom, and its 50 MP sensor reads license plates from up to 400 m away. An RYYB array gives greater light sensitivity per unit area than a standard RGGB array, and adjusting the IR cut filter further lowers the operational lux threshold. An NIR illuminator provides up to 100 m of effective illumination. The ranging system has a maximum measurement range of 3 km and supports pinpointing, line drawing and area calculation to mark assets or measure wildfire perimeters.

Sensing, Positioning and Challenging Conditions

LiDAR identifies thin obstacles at night, detecting power lines up to 32 m away, while mmWave radar cuts through interference in fog, rain or dust. The omnidirectional low-light sensing system uses full-color fisheye sensors to maintain visual positioning in conditions as dark as 0.5 lux, and Vision Assist provides full-color imagery. In dim urban areas, vision and LiDAR work together, and in pitch-black wilderness, LiDAR takes over to detect obstacles ahead. For power line inspection, the top-mounted LiDAR can detect and lock onto power and ground wires for lateral flight along the line.

Built-in ADS-B and RID receivers detect nearby manned and unmanned aircraft in real time and issue alerts. In weak-GNSS environments such as under bridges, in deep canyons or between urban high-rises, the Matrice 5T fuses visual and radar data to map its surroundings in real time. Its IP55 rating allows operation in dust and rain, and it performs across a temperature range of -20° to 50° C (-4° to 122° F). It can also take off from moving vessels and recognize landing patterns on a deck.

Transmission and Relay Modes

O4 Enterprise Enhanced uses the sub2G frequency band and a high-gain smart antenna array on the remote to transmit up to 40 km. Adaptive multi-band switching resists urban interference, and dual built-in DJI Cellular Dongle 2 modules switch automatically to the optimal network link, maintaining signal stability despite physical obstructions. Relay modes include Single-Relay, Dual-Controller, where a single relay drone extends the signal for one operational aircraft; Single-Relay, Single-Controller; 1 Relay, 2 Controllers, 3 Aircraft; and Dual-Relay, Dual-Controller. Video transmission uses AES-256 encryption.

Flight Time and Accessories

A 215Wh high-energy-density battery gives up to 59 minutes of flight time, so a single takeoff covers a broader operational area with fewer battery swaps and site transfers. The aircraft comes with low-noise propellers, reaches a maximum flight speed of 23 m/s and has reliable power redundancy. The new accessories include a remote, a 515 W fast-charging system, next-generation speaker and spotlight payloads, and a carrying case that is easy to carry with one hand.

Open Edge AI, Search and Patrol Routes

Built-in AI models detect over 20 target types by analyzing thermal and visible feeds in parallel on a split screen, locking onto vehicles, vessels, fires and other targets. Open onboard computing allows flexible deployment of custom algorithms. During telephoto shooting, a built-in AI foreground segmentation model separates targets from backgrounds, which reduces interference and keeps subjects in sharp focus with clear details.

When DJI Pilot 2 is connected to DJI FlightHub 2, cloud computing enables target searches using text or image prompts, and a multimodal LLM interprets the prompts, detects objects and triggers alerts. For AI Patrol Routes, an outlined area on the map automatically generates an efficient patrol route. The system detects targets in real time and executes custom actions such as hovering, capturing photos, recording video or broadcasting audio, then compiles detailed reports after the flight.

Surveying and Thermal Analysis

Paired with DJI Terra, the Matrice 5T delivers centimeter-level surveying accuracy without requiring GCPs and handles both routine inspections and high-precision aerial mapping. DJI Terra outputs 2D, 3D and point cloud models for GIS, emergency response and construction, with offline visible light PPK and D-RTK 3 imports improving reconstruction accuracy, and it also enables 2D thermal mapping, rolling-shutter reconstruction and video frame reconstruction.

The remote processes 200 photos in 8 minutes for local point clouds or 2.5D models, and a rough 3D model can be built from a single flight. After thermal operations, the DTAT 3.0 thermal analysis tool marks, analyzes and processes images to detect abnormal temperature points.

Software, Developer Tools and Data Protection

Pilot 2 automates tasks with Cruise, FlyTo, Smart Track and POI, and preset split-screen combinations of the camera and map feeds minimize switching between views. Open plugins and custom Pilot 2 plugins integrate additional capabilities directly. FlightHub 2 offers cloud-based aircraft and gimbal control, remote takeoff and landing, FlyTo Task, Smart 3D Capture, and geometric and slope route planning, while simultaneous live feeds keep air and ground teams synchronized in multi-drone cooperation.

Mobile SDK V5 lets developers build custom apps or use a plugin architecture to leverage core DJI Pilot 2 features, with fully open-source, production-level code samples. The Payload SDK uses E-Port V3 with encrypted authentication to verify payloads and secure data transmission. Cloud API, built into DJI Pilot 2 as an MQTT-based protocol, connects the Matrice 5T directly to cloud platforms for access to hardware, live video streams and photo data without developing an app. For onboard computing, model training tools and a developer certification process support intelligent algorithm developers. Data protection features are media data encryption, Local Data Mode and one-tap log clearing.

Lock

You have exceeded your free limits for viewing our premium content

Please subscribe to have unlimited access to our innovations.